Isıcam Systems S Series

 

Isıcam Systems S Series is the series produced with Şişecam Low-E Glasses with high quality heat control coating.”

Advantages

•  Compared to ordinary double glazing, it reduces heat losses by 50% and reduces fuel costs.

•  While it allows you to benefit from the sun's heat at the maximum level, it does not compromise on light transmittance.
•  It prevents window fronts from being cold in winter and delays fogging compared to ordinary double glazing.
•  Compared to ordinary double glazing, the expenditure you will make for Isıcam S will return to you in 1-2 years with the savings you will get from fuel in winter.

Isıcam Systems S Series is produced with Şişecam Low-E Glasses with high quality heat control coating. It reduces your fuel costs by providing maximum thermal insulation.

Isıcam Systems are produced by Isıcam Authorized Manufacturers who are regularly audited by Şişecam Flat Glass.

Isıcam brand is in production;

•  Glass and side materials are used in appropriate quality and quantity,
•  It is the assurance that the production is carried out continuously under suitable conditions and using modern technologies.

Isicam Systems is under the guarantee of Isicam Authorized Manufacturer for 10 years against production-related faults.

Personalize Your Isicam with Additional Features

Isıcam S L:

The Isıcam unit, produced by using Şişecam Low-E Glass, which provides heat control, and Şişecam Laminated Glass, which provides safety and security, prevents possible injuries by preventing the glass from scattering in case of breakage, in addition to the savings it provides in fuel costs.

Isıcam S AL:

The Isıcam unit, produced by using Şişecam Low-E Glass providing heat control and Şişecam Acoustic Laminated Glass providing noise control, provides sound insulation in addition to the savings it provides in fuel costs, while reducing noise transmissions, while also having the safety and security features of Şişecam Laminated Glass.

Isıcam S T:

It is produced using Şişecam Temperable Low-E Glass (glass with heat control coating), which provides safety. It is suitable for use as safety glass, as it reduces the risk of injury by breaking into small and blunt pieces when broken. It provides fuel savings with its maximum heat control feature.

Isıcam S 3 +:

It is a triple Isıcam unit that provides maximum insulation. It provides 4 times heat insulation compared to ordinary double glazing.

Isicam SR:

In addition to the savings it provides on fuel costs, the Isıcam unit, produced using Şişecam Low-E Glass, which provides heat control, and Şişecam Colored Flat Glass, which provides solar control, limits the solar heat entry into the building, controls the excessive brightness of the sun, and reduces cooling energy consumption, thus cooling costs, in environments where air conditioning is used. .

Isıcam S RF:

The Isıcam unit, produced by using Şişecam Low-E Glass, which provides heat control, and Şişecam Tentesol and Şişecam Tentesol Titanium, reflective glasses that provide solar control, in addition to the savings it provides in fuel costs, limits the solar heat entry into the building, controls the excessive brightness of the sun and consumes cooling energy in air-conditioned environments. thus reducing cooling costs. Due to its reflective feature, it creates a mirror effect when viewed from the direction of strong light. It provides visual integrity in commercial buildings with glass facades.

How Do I Know That I Have Purchased Isicam?

The following criteria must be present in your Isıcam that you bought from Doğrama.

Isıcam Authorized Manufacturer Name

The name of the Isıcam Authorized Manufacturer must be on the Isıcam spacer strip.

Hologram

There should be the Isicam S hologram and the phrase "Isicam Systems" on the Isicam spacer strip.

Ticket

There should be the Isicam S hologram and the phrase "Isicam Systems" on the Isicam spacer strip.

Warranty Certificate

Isıcam S is produced by Isıcam Authorized Manufacturers, who are regularly audited by Şişecam Flat Glass.
Be sure to ask for the 10-year warranty certificate provided by the Isıcam Authorized Manufacturer.

Usage areas

It is used in newly built or renovated residences and commercial buildings with solar control glazing.

Which Isicam should be used in which regions?

By choosing your Isıcam according to the climatic conditions of your region, you can provide the most accurate and efficient insulation.

Usage areas

Isıcam Systems is an insulating glass unit formed by combining two or more glass plates produced and/or sold by Şişecam Flat Glass in factory conditions to contain dry air or gases suitable for ambient pressure.

Performance Chart

In the TS 825 Thermal Insulation Rules Standard, the recommended value of Up= 2.4 W/m²K for new buildings (glass + joinery, heat transmission coefficient of windows) can be reached with Isıcam S and Isıcam K.

In Isıcam S and Isıcam K, the coating is located on the inner surface of the outer glass.

In Isıcam S combinations to be made with colored glasses, the nominal/performance values ​​given may vary according to the colorless glass combinations of the products.​

National / International Standards That Isicam Complies with

TS 3539 EN 1279 Glass - Used in Buildings - Glass Based Insulation Units

National / International Standards for Which Raw Materials Used Are Appropriate

•  Pine

  • Float TS EN 572/2
  • Glasses in market and final cut sizes TS EN 572/8
  • Frosted TS EN 572/5
  • Tempered TS EN 1215
  • Partially tempered TS EN 1863
  • Laminated TS EN ISO1254
  • Coated TS EN 1096
  • Heat treated tempered glass EN 14179
     
•  Other Raw Materials
  • In the production of insulating glass; Butyl, polysulfide (thiokol), silicone, polyurethane, dehumidifier and interstitial strip (profile) included in the Isıcam Approved Materials List prepared by Şişecam Flat Glass are used. In case the sealants used are replaced with sealants of other brands, provided that they are included in the Isicam Approved Materials List, the substitution conditions specified in article 4.2.2 of the TS 3539 EN1279-4 standard must be fulfilled.

Insulating Glass Quality

•  Isicam's Optical and Appearance Quality

  •  Point Defects

    The optical and appearance quality of Isıcam is defined in TS EN 1279/1. Accordingly, the optical and appearance quality given in the relevant standards of the glasses that make up Isıcam is valid.

    Since the appearance and quality conditions of the single plates do not exceed the maximum allowable error limit in the insulating glass unit, there is no need to seek additional conditions regarding this issue. However, a higher level of acceptance may be included in the quality agreement between the customer and the insulating glass unit manufacturer.

    Detailed information on the optical and appearance quality of Isıcam, which is in its natural structure and/or due to its physical properties, is given in TS EN 1279/1 Annex C.

    In Isıcam, TS EN 572/8 supply to the market and acceptance levels applied to glass in final cut dimensions are valid as a point defect.

    Acceptance levels for point defects in final cut dimensions of float glass used in Isıcam:

    Defect class	Surface area of ​​glass plate (S), m²
    	S ≤ 5	5 < S ≤ 10	10 < S ≤ 20
    A	not sought
    B	one	2nd	4
    C	inadmissible	one	one
    D	inadmissible
    The distance between class B defects should not be less than 500 mm.

     

    Point Defect Groups

    Group	Size of point defect nuclei (mm)
    A	Greater than 0.2 mm and less than or equal to 0.5 mm
    B	Greater than 0.5 mm and less than or equal to 1.0 mm
    C	Greater than 1.0 mm and less than or equal to 3.0 mm
    D	Greater than 3.0mm

    The tolerances in the TS EN 1096 Coated glass standard are valid in the coating of Isıcam units produced with Solar Low-E, Low-E, on-line reflective solar control coated glasses produced and/or sold by Şişecam Flat Glass.

  •  Linear (Scratches and Scratches) Defects

    The optical and appearance quality of Isıcam is defined in TS EN 1279/1. Accordingly, the optical and appearance quality given in the relevant standards of the glasses that make up Isıcam is valid.

    Since the appearance and quality conditions of the single plates do not exceed the maximum allowable error limit in the insulating glass unit, there is no need to seek additional conditions regarding this issue. However, a higher level of acceptance may be included in the quality agreement between the customer and the insulating glass unit manufacturer.

    Detailed information on the optical and appearance quality of Isıcam, which is in its natural structure and/or due to its physical properties, is given in TS EN 1279/1 Annex C.

    As mentioned in the TS EN 572/8 glass standard for placing on the market and final cut dimensions, no linear defects are allowed.

    While the observation distance is given as 2 m in the determination of both point and surface defects in the TS EN 572/8 glass standard for supply to the market and in the final cut dimensions, the observation distance will be taken as 1 m in the Isıcam standard. Therefore, the defects mentioned in TS EN 572/8 and TS EN 1096 can be considered as errors when they are detected at an observation distance of 1 m.

  •  Other Defects

    As it is known, the separating material (lucite dust, paper, etc.) placed between the plate glasses prevents the glasses from rubbing with each other, and protects the glass surface against humidity and temperature changes. The powder or paper placed between the glasses is in a composition that will not damage the chemical structure of the glass due to its properties, and no powder or paper is used. The particle size of the powder used is as important as its chemical structure. For this reason, the paper and powder to be placed between the glasses are specially selected and used under control.

    Corrosion failure occurs as a result of the condensation of moisture in the air or the deterioration of the chemical structure of the glass by wetting, in the point worn areas that will occur with the friction of the glass plates. The corrosion defect appears as white spots on the glass in the advanced stage. In the initial stage, it may not be visible to the naked eye. For this reason, it should be checked whether corrosion has started by keeping steam on the glasses from time to time at a close distance. Corrosion error is not allowed in the Isıcam unit. For this reason, care should be taken in the storage and transportation of glass packages. Especially in the winter months, when glass packages are put into operation, the package should not be opened and processed until the package temperature reaches ambient temperature.

    Dust, dirt, paste smears, fingerprints, etc. on the glass plate surfaces facing the gap. should not exist.

Thickness and Dimensions

Dimensional tolerances of Isıcam (according to EN 1279)